top of page
Scaffolding Rental & Purchase
All scaffolding material and components are manufactured as per Indian Standards and International Standards (European, American, Australian/New Zealand Standards).
Types of Materials Used
1. MS (Based on IS 1161, 1239, etc)
2. Structural Steel (Based on EN 10219-1, etc)
Corrosion Protection
1. Paint (As per requirement)
2. Galvanization (as per ISO 1461)
Types of Structure/ Scaffolding Material
Cuplock Scaffolding
Staircase Scaffolding
Ringlock Scaffolding
Tube and Clamp Scaffolding
Mobile Scaffolding
(On request only)
Components
Base Plate
Used for Tube and Clamp Scaffolding
Size: 150mm x 150mm
Standards conforming to BS 1139/EN 74
Size: 150mm x 150mm
Standards conforming to BS 1139/EN 74
Scaffolding Tube
Size: MS Scaffold Tubes 40mm NB (OD:48.3mm); upto 6m length; available in various sizes
Standards: conforming to IS-1161, 1239, EN 10219, BS 1139, AS/NZ 1576
Thickness: 2.9mm, 3.2mm, 4mm
Finish: Black/painted as per requirement/ galvanized
Standards: conforming to IS-1161, 1239, EN 10219, BS 1139, AS/NZ 1576
Thickness: 2.9mm, 3.2mm, 4mm
Finish: Black/painted as per requirement/ galvanized
Spigot
Size: Made out of 300/250mm long 38mm OD steel tube, suitable for connecting two Cuplock and ring lock standards vertically
Base Jack
Sizes: Plate dimensions: 150mm x 150mm; Hollow Shank- OD: 38mm, 40mm thick; Solid Shank- OD: 32mm, 34mm, 36mm, 38mm; Height- 450 to 650mm (Or as per client requirement)
Standard: BS EN 1139/ EN 74
Make: Drop Forged
Finished: Painted/ Galvanized
Standard: BS EN 1139/ EN 74
Make: Drop Forged
Finished: Painted/ Galvanized
Ladders
Size: Upto 6m length - 305mm x 305mm
Standard: 10219/ IS 3696
Make: Steel/ Aluminum
Standard: 10219/ IS 3696
Make: Steel/ Aluminum
Castor Wheels
Castor wheels are used under mobile scaffolding. We provide castor wheels for aluminium scaffolding and MS scaffolding.
Diameter: 6 inch to 10 inches
Load Capacity: Heavy duty and normal duty
Make: Nylon, Rubber, PU
Diameter: 6 inch to 10 inches
Load Capacity: Heavy duty and normal duty
Make: Nylon, Rubber, PU
Hop-Up Brackets
Used for cantilever platform in system scaffoldings. These are available for single board, two boards and three board allocations.
Size: 1m width
Make: MS Forged
Thickness: 2.9mm, 3.2mm, 4mm
Size: 1m width
Make: MS Forged
Thickness: 2.9mm, 3.2mm, 4mm
Cuplock/ Ring Lock Ledgers and Transoms
Size: 3.0M, 2.5M, 2.0M, 1.8M, 1.5M, 1.25M, 1.0M, 0.9M. 0.5M [Special Sizes on Request]
Make: Made out of 40mm NB (OD:48.3mm) Tubes with Forged Blades/ locks at the ends
Thickness: 2.9mm, 3.2mm, 4mm
Make: Made out of 40mm NB (OD:48.3mm) Tubes with Forged Blades/ locks at the ends
Thickness: 2.9mm, 3.2mm, 4mm
Cuplock Standard/ Ringlock Standard
Sizes: 3m, 2.5m, 2m, 1.5m, 1m, 0.5m [Special Sizes on Request]
Make: Made out of 40mm NB (OD:48.3mm) Tubes with the provision of cups/ rings at 500mm; Welded Bottom Cups/ rings are pressed from high-quality steel and captive mobile Top cups (for cuplock) out of Malleable Cast Iron provide firm grip to Ledger Blades making the connection rigid and to endure rough site handling.
Thickness: 2.9mm, 3.2mm, 4mm
Make: Made out of 40mm NB (OD:48.3mm) Tubes with the provision of cups/ rings at 500mm; Welded Bottom Cups/ rings are pressed from high-quality steel and captive mobile Top cups (for cuplock) out of Malleable Cast Iron provide firm grip to Ledger Blades making the connection rigid and to endure rough site handling.
Thickness: 2.9mm, 3.2mm, 4mm
Toe Boards
Toe Boards are used as toe guards with platforms formed by Steel Scaffold Boards.
Sizes: 3.0 x 0.15, 2.5 x 0.15, 2.0 x 0.15, 1.8 x 0.15, 1.25 x 0.15 [Other Sizes on Request]
Make: MS
Finish: Painted/ Galvanized
Sizes: 3.0 x 0.15, 2.5 x 0.15, 2.0 x 0.15, 1.8 x 0.15, 1.25 x 0.15 [Other Sizes on Request]
Make: MS
Finish: Painted/ Galvanized
Scaffolding Plank (With hook and without hook)
Steel Scaffold Boards (without hook/with hook) are light-weight non-slip working surface with perforated holes and stiffeners at the back (for rigidity)
Size: width of 230-250mm; depth 50mm; thickness of sheet: 1.5-3mm (Standard BS 1139, EN 2810); Lengths available: 3.0m, 2.5m, 2.0m, 1.8m, 1.2m, 1m, 0.5m
Make: MS
Finish: Painted, Galvanized
Size: width of 230-250mm; depth 50mm; thickness of sheet: 1.5-3mm (Standard BS 1139, EN 2810); Lengths available: 3.0m, 2.5m, 2.0m, 1.8m, 1.2m, 1m, 0.5m
Make: MS
Finish: Painted, Galvanized
Clamps
Standard: conforming to EN 74/ IS-2750/ BS-1139
Forged Fixed Clamp
These are heavy-duty right-angle couplers used for connecting two 40mm NB (OD:48.3mm) scaffold tubes at a right angle to each other.
Make: Forged/ Pressed
SWL: 6.1 kN (Class A) and 9.1 kN (Class B)
Make: Forged/ Pressed
SWL: 6.1 kN (Class A) and 9.1 kN (Class B)
Pressed Fixed Clamp
These are heavy duty right angle couplers used for connecting two 40mm NB (OD:48.3mm) scaffold tubes at a right angle to each other.
Make: Forged/ Pressed
SWL: 6.1 kN (Class A) and 9.1 kN (Class B)
Make: Forged/ Pressed
SWL: 6.1 kN (Class A) and 9.1 kN (Class B)
Beam Coupler
The Gravlock Girder Coupler has been specifically designed for attachment to either horizontal or vertical flanges, and will accommodate up to 43mm (13/4”) in depth. In erection the Gravlock Coupler is highly effective, as it enables the fitting to be bolted to the girder first, leaving both hands free to present and secure the tube.
Make: Forged
SWL: 30 kN (when used in pair)
Thickness: Made using 6mm thick material
Make: Forged
SWL: 30 kN (when used in pair)
Thickness: Made using 6mm thick material
Board Retaining Coupler (BRC)
The board retaining clamp is used on both ends to connect a steel tube to the plank.
Make: Pressed/ Forged
Make: Pressed/ Forged
Putlog Coupler
Putlog Couplers are available for 40 x 40mm NB (OD:48.3mm) Tubes. Conforming to EN 74.
Make: Hot Rolled
SWL: 0.63kN
Make: Hot Rolled
SWL: 0.63kN
Sleeve Coupler
Sleeve Coupler is used to join two 40mm NB (OD:48.3mm) Tubes in the same axis at their face from outside to continue their lengths for access.
Make: Forged
SWL: 3.1 kN
Make: Forged
SWL: 3.1 kN
Forged Round Clamp
These are heavy-duty Swivel Couplers used for connecting two 40mm NB (OD:48.3mm) scaffold tubes at any angle other than 90°, conforming to IS-2750/BS-1139/EN 74 Class B. Also available in Class A
Make: Forged/ Pressed
SWL: 6.1kN (Class A) and 9.1kN (Class B)
Make: Forged/ Pressed
SWL: 6.1kN (Class A) and 9.1kN (Class B)
Pressed Round Coupler
These are heavy-duty Swivel Couplers used for connecting two 40mm NB (OD:48.3mm) scaffold tubes at any angle other than 90°, conforming to IS-2750/BS-1139/EN 74 Class B. Also available in Class A
Make: Forged/ Pressed
SWL: 6.1kN (Class A) and 9.1kN (Class B)
Make: Forged/ Pressed
SWL: 6.1kN (Class A) and 9.1kN (Class B)
bottom of page